
Add to Cart
Current Mode Hall Voltage Transducer DC AC Pulsed Voltage Measurement
TBV-AS12/24 series current mode voltage sensor is a device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit, It provides accurate electronic measurement of DC,AC or pulsed voltage.
Electrical data(Ta=25℃±5℃)
Type | TBV50 AS12/24 | TBV100 AS12/24 | TBV200 AS12/24 | TBV300 AS12/24 | TBV400 AS12/24 | TBV500 AS12/24 |
Unit |
Rated input(Vpn) | 50 | 100 | 200 | 300 | 400 | 500 | V |
Measure range(Vp) | 100 | 200 | 400 | 600 | 800 | 1000 | V |
Turns ratio(Np/Ns) | 3333:1000 | T | |||||
Rated input(Ipn) | 3.0 | mA | |||||
Rated output | @Vp=±Vpn ±2±0.5% | V | |||||
Supply voltage | 12±5% /24±5% | V | |||||
Consumption current | 20+IpX(Np/Ns) | mA | |||||
Zero voltage | 5±0.5% | V | |||||
Offset voltage drift | @ -40℃~+85℃ ≤±0.3 | mV/℃ | |||||
Linearity | @Vp=0-±Vpn ≤0.2 | %FS | |||||
Response time | ≤40 | μS | |||||
Bandwidth | 20~10000 | HZ | |||||
Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV |
Applications
AC variable speed drives and servo motor drives
Static converters for DC motor drives
Variable speed drives
Power supplies for welding applications
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Switched Mode Power Supplies(SMPS)
Mechanical dimension(for reference only)
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
Directions for use
When the currentwill be measured goes through a transmitter ,the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the transmitter).
Customs can adjust Output amplitude of the transmitter by needs.
Custom design in the different rated input current and the output voltage available.
Standards
General date
Value | Unit | Symbol | |
Operating temperature | -40 to +85 | ºC | TA |
Storage temperature | -40 to +125 | ºC | TS |
Mass(approx) | 43 | g | M |